Honda 400ex Velocity Intake System

      Fits all model years

Kit Includes: Aluminum Intake, Uni POD Filter*, Water Repellant Outerwears, Silicon Intake Seal and all hardware. Uni Crankcase breather sold separately.

Replaces factory airbox with a mandrel bent and ultra-light aluminum intake tube, increases intake velocity for max power in dry conditions.

Increases intake velocity for max power at high RPM's with a noticeable increase in bottom end torque. Why? The stock airbox can impair airflow at high RPM while at low RPM the stock intake snorkel can collapse when you jump on the throttle with. For that reason this intake really kicks up the throttle response and power at low-mid RPM.

And you will feel the mid-high RPM power increase when you completely un-restrict your 400 or 440 ex's carburetor, the open intake lets the motor rev freely to the rev limiter. Works best with full performance exhaust system!

Includes Uni 2-Stage POD Filter UP6229ST*, Water Repellant Outerwears 20-1049-01

pictured with optional Uni crankcase breather UP-123 ($14)

This intake is only for dry riding conditions, and is perfect for drag racing and absolute dune ripping. Shaves off 4.1 lbs. from stock aribox this intake with filter and hardware is only 1.1 lbs vs stock 5.2 lbs.

Intake tube starts with a 6061 T6 aluminum tubing and is mandrel bent ever so slightly, then has a bracket welded that bolts to the left heal-guard mounting pad.

Works with or without heal guards installed.

No additional fabrication necessary, this is a simple bolt on unit!!!

Velocity Intake Features

Aluminum Intake (4.1 lbs lighter than stock airbox)

Uni 2-Stage POD Filter*

Water Repellant Outerwears

Heavy rubber intake seal with all hardware

Polished Finish

Jetting Recommendations Included

*IMPORTANT- UNI Performance Foam Filters come dry, oil before using with UNIFilter Foam Filter Oil